Features:
- Full composite construction, lightweight and strong
- Removable rudder, two piece wing and two piece stabiliser all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for servo extension leads
- Servo operated gear doors
Description
Viperjets are synonymous for a great flying jet, and this one really fulfils with expectations. Fast, slow, scale, acrobatic, fun, easy, it simply ticks all the boxes for your next jet!
Included Hardware
- Complete air frame (including aluminium wing-tubes and fibreglass control horns)
- Pilot-RC electric retracts and electric brakes
- Scale cockpit (minus pilot)
- Dual wall tail pipe (for 80-140N turbines)
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Aluminium air trap UAT
- Logo Decals
Any logos included at time of shipping are stickers, not paint.
Required Hardware
Turbine: 80-140N
Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Specification:
Wingspan: | 86.6in (2.2m) |
Wing Area: | TBC |
Fuselage Length: | 78.7in (2.0m) |
Weight: | 10.8Kg |
Engine: | 8 - 14Kg Thrust Turbine |
Video
Build Info
Aileron: 20mm, Rudder: 25mm, Elevator: 20mm. Flap: 35mm for take off and 65mm for landing.
The CG is 160-177mm from the front leading edge on the root of the wing.
Colour Schemes
For complete photo listing of Composite Viper Jet Colour Schemes please click here.
Any logos included at time of shipping are stickers, not paint.