Features:
- Full composite construction, lightweight and strong
- Removable two piece fuselage, the tailpipe mounts only on the rear fuselage section, allowing for easy removal and transport.
- Removable rudder, two piece wing and two piece stabilizer all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for servo extension leads
- Servo operated nose gear door. Mains attached direct to struts.
Description
Viperjets are synonymous for a great flying jet, and this one really fulfils with expectations. Fast, slow, scale, acrobatic, fun, easy, it simply ticks all the boxes for your next jet!
Included Hardware
- Complete air frame (including carbon wing-tubes and fibreglass control horns)
- Scale cockpit (minus pilot)
- Dual wall tail pipe (for 160-310N turbines)
- 6L kevlar fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- 2L smoke tank and fuel tubing pre-prepared, fuel dot and breather valve.
- Aluminium air trap UAT
- Pre-prepared pushrods with ball links
Required Hardware
Turbine: 160-310N
Servos: 9 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder, x1 for nose gear door and x1 for steering. Rudder and Flap servos are recommended to be +27kg)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Specification:
Wingspan: | 130in (3,260mm) |
Wing Area: | TBC |
Fuselage Length: | 118in (3,000mm) |
Weight: | 48.2lbs (21.9kg) – without fuel |
Build Manual
Aileron: 27mm, Rudder: 44mm, Elevator: 38mm. Flap: 38mm for take off and 82mm for landing.
The CG is 305mm from the front leading edge on the root of the wing.
Video