V2 - Futaba 1.25 Inch Servo Arm (Red)

Material: aluminium 6061-T6 (anodized)

Compatible with Futaba Servos (25T)

Length :1.25inch(31.75mm)

Fixing screw bolt is M3 or #4-40

Weight: 5g

1 Per package

Bolt is not included

Installation Guide

• Follow aircraft manufactures recommendation for Servo control horn set up.

• Loctite all servo screws.

• Install ball link on bottom of servo arm (where possible).

• Keep all linkage tight.

• Servo arms longer than what is recommended can cause.